User`s guide

129
Display system information
System information displays the model, MAC address, firmware version, and bios version of the
ConnectPort LTS product. It also displays memory available: total, used, and free, and tracks CPU
percent utilization and the uptime.
From the web interface menu, select Administration > System Information. Select
General, Serial, or Network for the appropriate information. For descriptions of the information
displayed on these screens, see “Display System Information.”
Reboot the ConnectPort LTS product
Changes to some device settings require saving the changes and rebooting the ConnectPort LTS
product. To reboot a ConnectPort LTS product:
1. From the web interface menu, select Administration > Reboot.
2. On the Reboot page, click the Reboot button. Wait approximately 1 minute for the reboot
to complete.
Enable/disable access to network services
As needed, enable and disable access to various network services, such as ADDP, RealPort, SNMP,
Telnet and ssh. For example, for performance and security reasons, it may be desirable to disable
access to all network services not necessary for running or interfacing with the ConnectPort LTS
product. In the web interface, enabling and disabling network services is done on the Network
Services settings page for a ConnectPort LTS product. See "Network services settings".