User`s guide

111
Network statistics
Network statistics are detailed statistics about network and protocol activity that may aid in
troubleshooting network communication problems. Statistics displayed are those gathered since the
unit was last rebooted. If an error counter accumulates at an unexpected rate for that type of counter,
there may be a problem in the ConnectPort LTS product.
Ethernet Connection Statistics
Speed
Ethernet link speed: 10, 100 or 1000 Mbps. N/A if link integrity is not detected, for
example, if the cable is disconnected.
Duplex
Ethernet link mode: half or full duplex.
N/A if link integrity is not detected, for example, if the cable is disconnected
Bytes Received
Bytes Sent
Number of bytes received or sent.
Packets Received
Number of packets received and delivered to a higher-layer protocol.
Packets Sent
Number of packets requested to be sent by a higher-layer protocol.
IP Statistics
Datagrams Received
Datagrams Forwarded
Number of datagrams received or forwarded.
Forwarding
Displays whether forwarding is enabled or disabled.
No Routes
Number of outgoing datagrams for which no route to the destination IP could be found.
Routing Discards
Number of outgoing datagrams which have been discarded.
Default Time-To-Live
Number of routers an IP packet can pass through before being discarded.