User`s guide

11
Quick reference for configuring features
This guide primarily focuses on configuration, monitoring, and administration tasks from the web
interface. This table provides a quick reference for configuring features and performing device tasks,
and where to find the features and settings in the web interface and this guide.
Some features are configurable from the command line interface only. In those cases, the
commands that configure the feature are noted. The command descriptions are in the ConnectPort
LTS Command Reference.
Feature/task
Path to feature in the web interface
Administration/Configuration management:
File management: uploading and
downloading files, such as applet files,
and custom splash screens.
Administration > File Management
See also the Digi Connect Family Customization and
Integration Guide for information on uploading and
downloading files used to customize a the product’s look-
and-feel.
Python program file management. Administration > File Management
Backup/restore configuration settings
Administration > Backup/Restore
Note: TFTP or BOOTP required if backing up from the
command line.
Update firmware
Administration > Update Firmware
Reset configuration to factory defaults
Administration > Factory Default Settings
System information, including device
identifiers and statistics
Administration > System Information
Reboot the device
Administration > Reboot
Alarms
Configuration > Alarms
Autoconnection: automatically connect a
user to a server or network device
Configuration > Serial Ports > port > Profile Settings >
TCP Sockets >
Automatically establish TCP connections
Connection management:
Manage serial port connections
Management > Serial Ports
Manage active PPP connections
Management > Connections > Active PPP Connections
Manage active system connections
Management > Connections > Active System
Connections
Domain Name System (DNS) Client Configuration > Network > DNS > Primary DNS and
Secondary DNS
Ethernet settings Configuration > Network > Advanced Network Settings