Installation guide

98
set portgroup
Purpose Configures or displays port group settings. Port group is a convenience feature
which can be created to send data to multiple ports. Instead of sending data to
individual serial ports, data can be sent to all ports in a group simultaneously
through a port in a group.
Required permissions Permissions must be set to one of the following:
For a user to display the port group
settings for serial ports: “set permissions s-serial=read”
For a user to display and set the authentication settings for serial ports:
“set permissions s-serial=rw”
Syntax Add and configure a new port group
set portgroup add index=1-16
[newname=new group name]
[ports=0-32]
[showdata={on|off}]
[sendbyte=1-4096]
[sendidle=1-65535]
Remove port groups
set portgroup remove index=1-16
Display current port group settings for all available port groups
set portgroup
Display current port group settings for a particular port group
set portgroup name=group name