Installation guide

94
Options port=(port|xbee|internalmodem)
The serial port number or range of serial ports associated with the port
authentication settings. Required when configuring port authentication
settings. To configure authentication settings for an XBee port or internal
modem, specify port=xbee or port=internalmodem.
authmethod={none|local|radius_server|radius_local|
local_radius|radius_down_local|ldap_server|ldap_local|local_ldap}
The port authentication method to be used for the serial port. Required
when configuring port authentication settings. The value of “authmethod”
can be one of the following:
none
When selected, user can access the serial port without
authentication. This is the factory default setting.
local
When selected, user who registered the local database of
ConnectPort LTS through user configuration can only access the
serial port.
radius_server
When selected, user who registered the database of Radius server
specified can only access the serial port.
radius_local
When selected, the user authentication performed through the
Radius server first. If succeeded, user can access the serial port. If
failed, user authentication performed through local database of
ConnectPort LTS again.
local_radius
When selected, the user authentication performed through the local
database of ConnectPort LTS first. If succeeded, user can access
the serial port. If failed, user authentication performed through the
Radius server again.