Installation guide

92
Options port=range
Used to specify the serial port.
state={on|off}
Used to enable or disable modem emulation on a given serial port.
on
Enables modem emulation.
off
Disables modem emulation.
The default is “off”.
telnet
Enables or disables Telnet processing on incoming and outgoing modem-
emulation connections.
on
Enables Telnet processing.
off
Disables Telnet processing.
The default is “off”.
Example #> set pmodem port=1 state=on
See also • "revert"
• "show"