Installation guide

91
set pmodem
Purpose Configures various options for modem emulation over TCP/IP, and display
current modem-emulation settings.
Required permissions For products with two or more users, to use this command, permissions must
be set to one of the following:
For a user to display the modem emulation settings for the line on which
they are logged in: “set permissions s-pmodem=r-self”
For a user to display the modem emulation settings for any line: “set
permissions s-pmodem=read”
For a user to display and set the modem emulation settings for the line on
which they are logged in: “set permissions s-pmodem=rw-self”
For a user to display the modem emulation settings for any line, and set
modem emulation settings for the line on which the user is logged in: “set
permissions s-pmodem=w-self-r”
For a user to display and set the modem emulation settings on any line:
“set permissions s-pmodem=rw”
See "set permissions" for details on setting user permissions for commands.
Syntax Configure modem emulation
The connection-type option, "telnet," applies to both incoming and outgoing
calls via the pmodem feature.
set pmodem port=range
[state={on|off}]
[telnet={on|off}]
Display modem-emulation settings
set pmodem [port=range]