Installation guide

s-serial={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set serial” and "set switches" commands. (See "set

serial" and "set switches")

s-service={none|read|rw}

Permissions for the “set service” command. (See "set service")

s-snmp={none|read|rw}

Permissions for the “set snmp” command. (See "set snmp")

s-socket-tunnel={none|read|rw}

Permissions for the "set socket_tunnel" command. (See "set

socket_tunnel")

s-sysauth ={none|read|rw}

Permissions for the “set sysauth” command. (See "set sysauth")

s-system={none|read|rw}

Permissions for the “set system” command. (See "set system")

s-tcpserial={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set tcpserial” command. (See "set tcpserial")

s-trace={none|read|rw}

Permissions for the “set trace” command. (See "set trace")

s-udpserial={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set udpserial” command. (See "set udpserial")

s-usb ={none|read|rw}

Permissions for the “set usb” command. (See "set usb")

s-user={none|read|rw}

Permissions for the “set user” command. (See "set user")

s-xbee={none|read|rw}

Permissions for the “set xbee” command.

s-webui ={none|read|rw}

Permissions for the “set web” command. (See "set web")