Installation guide

s-alarm={none|read|rw}

Permissions for the “set alarm” command. (See "set alarm")

s-autoconnect={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set autoconnect” command. (See "set autoconnect")

s-group={none|read|rw}

Permissions for the “set group” command. (See "set group")

s-host={none|read|rw}

Permissions for the “set host” command. (See "set host")

s-internalmodem={none|read|rw}

Permissions for the “set internalmodem” command. (See "set

internalmodem")

s-lcd ={none|read|rw}

Permissions for the “set lcd” command. (See "set lcd" )

s-modem ={none|read|rw}

Permissions for the “set modem” command. (See "set modem")

s-network={none|read|rw}

Permissions for the “set network” command. (See "set network")

s-permissions={none|read|rw}

Permissions for the “set permissions” command itself.

s-pmodem={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set pmodem” command. (See "set pmodem")

s-portauth ={none|read|rw}

Permissions for the “set portauth” command. (See "set portauth")

s-ppp={none|read|rw}

Permissions for the “set ppp” command. (See "set ppp")

s-profile={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set profile” command. (See "set profile")

s-python={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set python” command. (See "set python")

s-rtstoggle={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set rtstoggle” command. (See "set rtstoggle")

s-sdmemory ={none|read|rw}

Permissions for the “set sdmemory” command. (See "set sdmemory")