Installation guide

79
Examples Manually set the device IP v4 address of Ethernet interface 1
#> set network index=1 mode_v4=static ip_v4=10.0.0.2
gateway_v4=10.0.0.1 submask_v4=255.255.255.0
Use DHCP to find an IPv4 address, gateway address, and submask of
Ethernet interface 2
#> set network index=2 mode_v4=dhcp
See also • "revert"
• "set autoconnect"
• "set dhcpserver"
• "set service"
• "set wlan"
• "show"