Installation guide

77
ip_6to4tunnel={off|on}
Set this option on to supply 6to4 Tunneling which consists of
encapsulating IPv6 packets within IPv4, in effect using IPv4 as a link
layer for IPv6 so that ConnectPort LTS product can reach the remote
IPv6 Internet through the existing IPv4 infrastructure.
on
Enable 6to4 Tunneling
off
Disable 6to4 Tunneling.
ip_v4_6to4relay= ipv4 address of remote 6to4 relay
Set the IPv4 address of the remote 6to4 relay device.
ip_v6_v4addr= public ipv4 address for 6to4 tunneling
Set the public IPv4 address to be used for 6to4 tunneling. If not set,
current IPv4 address of ConnectPort LTS will be used.
[dns options]
Set DNS(Domain Name Server)-related options for the ConnectPort LTS
product, including:
manual_dns={off|on }
Configure manual DNS(Domain Name Server) option for the
ConnectPort LTS product
on
Enable manual DNS.
off
Disable manual DNS.
dns1=primary dns server ip address
dns2=secondary dns server ip address
For DNS, these options specify the DNS nameservers to use. Name
lookups will be performed using the nameserver specified on “dns1”
first, and if fails, the nameserver specified on “dns2” will be used.