Installation guide

76
ip_v4=device ipv4 address
Sets the device IP v4 address when DHCP is off. This option is
only applicable if the “mode_v4” option is set to “static”
submask_v4= subnet mask for ipv4 address
Sets the device submask address when DHCP is off. This
option is only applicable if the “mode_v4” option is set to
“static”
gateway_v4= gateway ipv4 address
Sets the network gateway IP address.
[ipv6 address options]
Set IPv6 address-related options for the ConnectPort LTS product,
including:
mode_v6={none|static|dhcp|auto}
Sets the mode of device IP v6 address
none
Disable IPv6 address.
static
When selected, the device uses the specified IP address and
gateway address.
dhcp
When selected, the device attempts to use the DHCP v6
protocol to find an IP address and gateway address.
auto
When selected, the device attempts to use the stateless
autoconfiguration protocol to find an IP address and
gateway address.
Default is “none” for both Ethernet interface 1 and 2.
ip_v6= gateway ipv6 address
Sets the device IP v6 address when DHCP or Auto configuration is
off. This option is only applicable if the “mode_v6” option is set to
“static.”
gateway_v6= gateway ipv6 address
Sets the network gateway IP address.