Installation guide

set network

Purpose Sets and displays network configuration options.

Required permissions For products with two or more users, permissions must be set to

“set permissions s-network=read” to display network configuration attributes,

and “set permissions s-network=rw” to display and set network configuration

attributes. See "set permissions" for details on setting user permissions for

commands.

Syntax Set network configuration options

set network [index=1-4]

[ipv4 address options]

[ipv6 address options]

[dns options]

[tcp keepalive options]

[advanced ip options]

Where:

[ipv4 address options] are:

[mode_v4={none|static|dhcp}]

[ip_v4=device ipv4 address]

[submask_v4=subnet mask for ipv4 address]

[gateway_v4=gateway ipv4 address]

[ipv6 address options] are:

[mode_v6={none|static|dhcp|auto}]

[ip_v6=device ipv6 address]

[gateway_v6=gateway ipv6 address]

[ip_6to4tunnel={off|on}]

[ip_v4_6to4relay=ipv4 address of remote

6to4 relay]

[ip_v6_v4addr=public ipv4 address for

6to4 tunneling]

[dns options] are:

[manual_dns={off|on }]

[dns1=primary dns server ip address]

[dns2=secondary dns server ip address]