Installation guide

73
connection_type={incoming|outgoing|network_bridge}
Specifies the connection type of a modem profile.
incoming
Used for dial-in connections, such as inbound PPP
connections or to manage a device through a telephone
network. The ConnectPort LTS product server will receive
connections from other hosts.
outgoing
The modem will dial-out to establish connections with
external hosts or to connect to an external PPP network.
network_bridge
The modem can be used both to establish connections to
other hosts as well as receive connections from other hosts.
ppp_connection={on|off}
Specifies whether the modem will use the PPP connection.
on
Allow user to use the PPP connection.
off
Do not allow user to use the PPP connection.
init_string=string
An AT command that is sent to the modem after it is reset.
Examples Set a serial port to an incoming modem profile
#>set modem port=1 state=on connection_type=incoming
Display current modem settings
#>set modem
See also • "show modem"
• "set ppp"