Installation guide

65
speed={10|100|1000|auto
Configures the Ethernet speed the ConnectPort LTS product will use on the
Ethernet network. Specify an appropriate setting for your Ethernet network,
which can be one of the following:
10
The device operates at 10 megabits per second (Mbps) only.
100
The device operates at 100 Mbps only.
1000
The device operates at 1000 Mbps only.
auto
The device senses the Ethernet speed of the network and adjusts
automatically.
The default is “auto.” If one side of the Ethernet connection is using auto
(negotiating), the other side can set the Ethernet speed to whatever value is
desired. Or, if the other side is set for 100 Mbps, this side must use 100
Mbps.
Example Configure 100 Mbps Ethernet speed
#> set ethernet speed=100
See also • "set network" to configure network communications options.
• "revert"
• "show"