Installation guide

Examples Display port buffer configuration for all ports

#> set buffer

Configure buffers

In this example, the set buffer command sets the buffer state for port 1

to on mode and the buffer size to 64 kilobytes.

#> set buffer port=1 state=on size=64

In this example, the set buffer command sets the buffer state for port 1

to on mode and the data will be buffered on NFS server with 16

kilobytes of buffer size.

#> set buffer port=1state=on autobk=nfs autobk_size=16

In this example, the set buffer command sets the buffer state for port 1

to on mode and the data will be sent to SYSLOG server.

#> set buffer port=1state=on syslog_state=on