Installation guide

53
subject=string
If “type=email,” this option specifies the text to be included in the “subject”
field of an alarm-triggered email. If “type=snmptrap,” this option specifies
the text to be included in the “Serial Alarm Subject” field of an alarm-
triggered SNMP trap.
to=string
The text to be included in the “to” field of an alarm-triggered email.
type={email|snmptrap|all}
Used to determine what kind of an alarm is sent: an e-mail alarm, an
SNMP trap or both.
For SNMP traps to be sent, the IP address of the system to which traps are
sent must be configured, by issuing a “set snmp” command with the
“trapdestip” option. See "set snmp."
email
An email alarm is sent.
snmptrap
An SNMP trap is sent. If snmptrap is specified, the “subject” text is sent
with the alarm. The MIBs for these traps are DIGI-SERIAL-ALARM-
TRAPS.mib, and DIGI-MOBILETRAPS.mib.
all
Both an email alarm and SNMP trap are sent.
The default is “email.”