Installation guide

49
socket_tunnel
Reverts the socket tunnel settings configured by the “set socket_tunnel”
command.
switches [port=range]
Reverts the switch settings configured by the “set switches” command.
syslog
Reverts the SYSLOG settings configured by the “set syslog” command.
system
Reverts the system settings configured by the “set system” command.
tcpserial [port=range]
Reverts the TCP serial settings configured by the “set tcpserial” command.
udpserial [port=range]
Reverts the UDP serial settings configured by the “set udpserial” command.
usb
Reverts the USB settings configured by the “set usb” command.
web
Reverts the Web settings configured by the “set web” command.
xbee
Reverts the XBee settings configured by the “set xbee” command.
Examples Reset a device’s serial setting
The device serial setting is reset to the default serial configuration.
#> revert serial
Reset a serial port to default settings
#> revert serial port=2
See also • "boot"
• The various “set” commands referenced in this description.
• "show"