Installation guide

48
ppp
Reverts the Point-to-Point Protocol (PPP) settings, configured by the “set
ppp” command.
profile [port=range]
Reverts the profile settings configured by the “set profile” command.
python
Reverts the Python program settings configured by the "set_python"
command.
realport
Reverts the Realport settings configured by the “set realport” command.
rtstoggle [port=range]
Reverts the Rtstoggle settings configured by the “set rtstoggle” command
samba
Reverts the service settings configured by the “set samba” command.
sdmemory
Reverts the SD memory settings configured by the “set sdmemory”
command.
serial [port=range]
Reverts the serial settings configured by the “set serial” command.
serialport [port=range]
Reverts all serial settings configured by the “set serial”, “set tcpserial”, “set
udpserial”, “set profile”, “set serial”, “set buffers”, “set pmode”, and “set
modem” command.
service
Reverts the service settings configured by the “set service” command.
smtp
Reverts the SMTP settings configured by the “set smtp” command.
snmp
Reverts the SNMP settings configured by the “set snmp” command.