Installation guide

32
Output Following are descriptions of the statistics displayed for each “info” command
option. The statistics displayed include data, event, and error counts. These
statistics are useful in understanding how the device is operating and can be
helpful in finding problems. In particular if an error counter is found to be
increasing you may have a problem with the device. To reset the statistics,
reboot the device.
Device statistics
Device Information
Description
Product
The model of the device.
MAC Address #1 &
#2
A unique network identifier for Ethernet
interface #1 & #2, respectively. All network
devices are required to have their own unique
MAC address. The MAC address is on a sticker
on your device. The number is
displayed as 12 hexadecimal digits, usually
starting with 00:40:9D.
Firmware Version
The current firmware version. This information
may be used to help locate and download new
firmware. Firmware updates may be
downloaded from the Digi Support website.
Bios Version
The current bios version.
CPU Utilization
The amount of CPU resources being used by
the device.
Uptime
The amount of time the device has been
running since it was last powered on or
rebooted.
Total Memory
The total amount of memory (RAM) available.
Free Memory
The amount of memory (RAM) currently not
used.
Used Memory
The amount of memory (RAM) currently in
use.