Installation guide

31
Options For a description of the statistics displayed by all these options see the
statistics tables in the “Output” section of this description.
device
Displays statistics from the device table. This information includes device-
model information, MAC address, current Bios and firmware, memory usage,
utilization, and uptime. The information displayed by this option is the same as
that displayed by the “display device” command (see "display").
For models with dual power supplies, such as ConnectPort LTS 16 MEI 2AC,
this command displays the status of the power supplies (“Normal” or “Fail.”).
ethernet
Displays statistics from the Ethernet table.
icmp
Displays statistics from the ICMP table.
ip
Displays statistics from the IP table.
serial
Displays statistics from the serial table. For descriptions of these statistics, see
"Output" section below.
tcp
Displays statistics from the TCP table.
udp
Displays statistics from the UDP table.
zigbee_sockets
Displays statistics from the Zigbee socket information.