Installation guide

tcp

Displays active TCP sessions and active TCP listeners. To display more

TCP-related statistics, such as number of input and output bytes transmitted,

issue an “info tcp” command (see "info").

udp

Displays current UDP listeners. To display more UDP-related statistics,

such as number of input and output bytes transmitted, issue an “info udp”

command (see "info").

uptime

Displays amount of time since the device was booted.

versions

Displays boot firmware version information.

xbee {refresh|clear}

Displays or refreshes device information of XBee module on the network.

For products with two or more users, permissions must be set to “set

permissions s-xbee = read” to user this command. See "set permissions"

for details on setting user permissions for commands.

refresh

Refresh the information of XBee devices on the network

clear

Remove current network information of XBee devices and refresh the

information of XBee devices on the network again.