Installation guide

190
wan
Purpose Initiates and controls wide-area network (WAN) connections, or displays the
status of current WAN connections.
Required permissions Anyone can display the status of WAN connections. Root privileges are
required to initiate or control WAN connections.
Syntax Initiate and control WAN connections
wan [close=username]
[start=username]
[range=range]
Display status of WAN connections
wan [range=range]
Options close=username
Closes the specified WAN interface
start=username
S the specified WAN interface
range=range
The range of ports to which the command applies. This range begins
with 0, which is the internal modem, or, if there is no internal modem,
with the first serial port.