Installation guide

182
show
Purpose Displays the current settings in a device, including current configuration
settings, boot code loaded in the device, and the effects of commands issued to
the device.
Required permissions For products with two or more users, for this command to display current
device settings, the various “set” commands must have be set to either “read”
or “r-self,” depending on the available permissions for the commands. See
"set permissions" for details on setting user permissions for commands.
Syntax show option [port=range] [range=range]
Options option
Specifies which settings in the device to show. The following options
can be specified. The use of the “port” and “range” options on the
show command depends on whether the command that was used to
configure the settings uses the “port” and “range” options as well.