Installation guide

175
groupaccess={on|off}
Specifies whether the user is allowed to use the access rights for any
associated groups. This allows a group to define the access rights for
users. For instance, if the user has “commandline=off” and an
associated group has “commandline=on,” then the user will have
command line access if “groupaccess=on.
on
The user can use group access rights.
off
The user cannot use group access rights.
The default is “off
defaultaccess={none|climenu|shell}
Specifies the default access method to the ConnectPort LTS device,
and the interface that a user will be given upon logging into the
device. Note that the specified interface must be enabled for the user
and have a valid menu and/or group if specified.
none
The user has no default access to the device and must
explicitly specify the access type. If the user and/or
associated group has no access rights then the user is not
allowed to access either the command line interface or the
Linux shell.
climenu
The user can display and access the command-line menu
interface.
shell
The user will be displayed and given access to the Linux
shell (Linux command line interface) assuming the user
and/or associated groups have command line access rights
enabled. The default is “off.”
The default for this option is “climenu.”