Installation guide

171
USB Modem options
Obtain the values for these options from your cellular service
provider.
apn=string
The Access Point Name (APN).
pin=string
The pin for logging on the USB modem.
number=string
The dial-in number for logging onto the cellular network for the USB
modem.
auth={none|chap|pap|both}
The authentication protocol for connections over the USB modem.
none
The remote user does not require authentication.
chap
Challenge Handshake Authentication Protocol (CHAP)
authentication is required.
Note: MS-CHAP is not supported.
pap
Password Authentication Protocol (PAP) authentication is
required.
both
Both CHAP and PAP authentication are required.
The default is “none.” CHAP authentication works between two Digi
Connect products. CHAP will be negotiated to PAP for all other
connections.
user=string
The user name for logging onto the cellular network via the USB
modem.
password=string
The password for logging the specified username onto the cellular
network via the USB modem.
Example Format the USB memory
#>set usb format id=1
See also "show usb"