Installation guide

164
set udpserial
Purpose Configures and displays current settings for the UDP serial feature. This
feature allows data to be sent between the serial port and one or more remote
network destinations using the UDP protocol. When this feature is enabled for
a given serial port, data sent to the serial port will be sent out to the configured
destinations. Also any time data is sent to the UDP serial service (IP port 2101)
and the serial port is not being used by another service, the data will be sent to
the serial port.
Required permissions For products with two or more users, to use this command, permissions must
be set to one of the following:
For a user to display the UDP serial settings for the line on which
they are logged in: “set permissions s-udpserial=r-self”
For a user to display the UDP serial settings for any line:
“set permissions s-udpserial=read”
For a user to display and set the UDP serial settings for the line on
which they are logged in: “set permissions s-udpserial=rw-self”
For a user to display the UDP serial settings for any line, and set
UDP serial settings for the line on which the user is logged in:
“set permissions s-udpserial=w-self-r”
For a user to display and set the UDP serial settings on any line:
“set permissions s-udpserial=rw”
See "set permissions" for details on setting user permissions for commands.