Installation guide

153
set system
Purpose Configures and displays system-identifying information, such as a description
of the device, its location, and a contact person.
Required permissions For products with two or more users, permissions must be set to “set
permissions s-service=read” to display network service settings, and “set
permissions s-services=rw” to display and change network service settings.
Syntax Change system-identifying information
set system [description=string]
[location=string]
[contact=string]
Display system-identifying information
set system
Options description=string
A description of this device. The maximum length is 64 characters.
The default is “”.
location=string
The location of this device. The maximum length is 64 characters.
The default is “”.
contact=string
The contact for this device. The maximum length is 64 characters.
The default is “”.
Example Set description, contact, and location
#> set system description=”Engineering printer”
location=”Room 1347” contact=”John Doe at x-3749”
See also • "revert"
• "show"