Installation guide

151

timeout=0-300

The timeout (specified in seconds) controls how long the ConnectPort LTS

will wait for the response from Radius authentication server. Factory

default value is 10.

retries=1-50

Specifies how many times the ConnectPort LTS will try to communicate

with the Radius authentication server. Factory default value is 3.

searchbase =string

The name of the LDAP search base; that is, the distinguished name of the

search base object. This setting defines the location in the directory from

which the LDAP search begins.

domainname={hostname|ip address}

If the LDAP database resides on a Microsoft system, the domain name for

the active directory must be configured on this option. If using a non-

Microsoft system, do not use this setting, as it changes the LDAP to

comply with Microsoft syntax.

ldapsecopt ={off|start_tls}

Security option for LDAP authentication. If start_tls is selected, the

StartTLS extended operation is used to secure the communication between

ConnectPort LTS and the LDAP Server.

Example #> set sysauth index=1 authmethod=radius

primary_authsvr=192.1681.1 secret=teststring