Installation guide

149
radius_down_local
User authentication is performed through the Radius server first. If
authentication is successful, the user can access CLI or Web server.
If the Radius server does not respond to the authentication request
from the ConnectPort LTS, user authentication is performed
through local database of ConnectPort LTS again. If authentication
through the Radius server fails, authentication through the local
database of the ConnectPort LTS is not performed and the user
cannot access the CLI or Web server.
ldap_server
Only the user who registered the database of LDAP server
specified can access CLI or Web server.
ldap_local
User authentication is performed through the LDAP server first. If
authentication is successful, the user can access CLI or Web server.
If authentication fails, user authentication is performed through
local database of ConnectPort LTS again.
local_ldap
User authentication is performed through the local database of
ConnectPort LTS first. If authentication is successful, the user can
access CLI or Web server. If authentication fails, user
authentication is performed through the LDAP server again.
ldap_down_local
User authentication performed through the LDAP server first. If
succeeded, user can access CLI or Web server. But if the LDAP
server does not respond to the authentication request from the
ConnectPort LTS, user authentication performed through local
database of ConnectPort LTS again. But if the authentication
through the LDAP server is failed, authentication through local
database of ConnectPort LTS is not performed and the user cannot
access CLI or Web server.