Installation guide

148
Options index=1-2
The index number associated with the system authentication settings.
Required when configuring system authentication settings. To configure
authentication settings for Web server, specify “index=1.” To configure
authentication settings for CLI access, specify “index=2.”
authmethod= {local|radius_server|radius_local|
local_radius|radius_down_local|ldap_server|ldap_local|local_ldap|
ldap_down_local}
The authentication method to be used for CLI or Web server. Required
when configuring system authentication settings.
local
The user who registered the local database of ConnectPort LTS
through the user can only access the CLI or Web server.
radius_server
The user who registered the database of Radius server specified
can only access the CLI or Web server.
radius_local
User authentication is performed through the Radius server first. If
authentication is successful, the user can access the CLI or Web
server. If authentication fails, user authentication is performed
through local database of ConnectPort LTS again.
local_radius
User authentication is performed through the local database of
ConnectPort LTS first. If authentication is successful, the user can
access the CLI or Web server. If authentication fails, user
authentication is performed through the Radius server again.