Installation guide

147
set sysauth
Purpose Configures or displays authentication settings for the command-line interface
or web server. The following authentication options are provided:
Local
Radius
LDAP
Required permissions Permissions must be set to one of the following:
For a user to display the authentication settings for CLI or Web server:
“set permissions s-sysauth=read”
For a user to display and set the authentication settings for CLI or Web
server: “set permissions s-sysauth=rw”
Syntax Configure authentication settings of CLI or Web server
set sysauth index=(1-2)
authmethod={local|radius_server|
radius local|local radius|radius down local|
ldap_server|ldap_local|local_ldap|
ldap_downlocal}
[accountingsocket=0-65535]
[authsocket=0-65535]
[primary authsvr={hostname|ip address}]
[secondary authsvr={hostname|ip address}]
[primary_acctsvr={hostname|ip address}]
[secondary acctsv={hostname|ip address}]
[secret=password]
[timeout=0-300]
[retries=1-50]
[searchbase=string]
[domainname={hostname|ip address}]
[ldapsecopt={off|start tls}]
Display current authentication settings of CLI or Web server
set sysauth