Installation guide

128
Service
Services provided
Default
network port
number
Secure Socket Service
Authentication and encryption for
ConnectPort LTS products.
2601
Simple Network Management
Protocol (SNMP)
Managing and monitoring the ConnectPort
LTS product. If you want to run SNMP, but in
a more secure manner, note that SNMP allows
for “sets” to be disabled. This securing is done
in SNMP itself, not through this command.
161
Transmission Control Protocol
(TCP) Echo
Used for testing the ability to send and receive
over a TCP connection, similar to a ping.
7
Telnet
Allows users an interactive Telnet session to
the ConnectPort LTS product’s command-line
interface.
23
Telnet Passthrough
Allows a Telnet connection directly to the
serial port, often referred to as reverse Telnet.
2001
Transmission Control Protocol
(TCP) Passthrough
Allows a raw socket connection directly to the
serial port, often referred to as reverse sockets.
2101
User Datagram Protocol
(UDP) echo
Used for testing the ability to send and receive
over a UDP connection, similar to a ping.
7
User Datagram Protocol
(UDP) Passthrough
Allows raw data to be passed between the
serial port and UDP datagrams on the
network.
2101
Socket Tunnel Server
Allows a Socket Tunnel connection between
ConnectPort LTS product and the remote
device.
4401