Installation guide

111
exclusive={on|off}
Enables or disables exclusive mode for RealPort connections. Exclusive
mode allows the device to close an existing RealPort connection and
establish a new one immediately upon a new connection request from the
same IP address. This mode is useful when using RealPort over wide area
networks, which can be unstable and where you are charged by the byte
(such as cellular or satellite), and you do not wish to incur costs for keep-
alive traffic. Exclusive mode allows your application to retain continuity
when temporary, unexpected interruptions in network connectivity occur.
Example #> set realport keepalive=on
See also • "set network". The “set network” keepalive options (“idle,” “probe_count,”
“probe_interval”) should be configured for various services that are
configured by “set service keepalive={on|off},” or clients such as autoconnect
(“set autoconnect keepalive={on|off}”).
• "set service"
• "set autoconnect"