Installation guide

107
Options port=port
The serial port number or range of serial ports associated with the port
profile. Required when configuring port profiles.
profile=profile name
The port profile to use for the serial port. Required when configuring port
profiles. Choosing a particular port profile causes the serial port’s
configuration to be reset to defaults, and then for the default settings for
that port profile to take effect.
Depending on the port-profile choices available for the device, the value of
“profile” can be one of the following:
console_management
Associates the Console Management port profile with the port.
modem_emulation
Associates the Modem Emulation port profile with the port.
realport
Associates the RealPort port profile with the port.
tcp_sockets
Associates the TCP Sockets port profile with the port.
tunneling
Associates the Serial Bridge port profile with the port.
udp_sockets
Associates the UDP Sockets port profile with the port.
custom
Associates the Custom port profile with the port.
printer
Associates the Printer port profile with the port.
modem
Associates the Modem port profile with the port.
local config
Associates the Local Configuration port profile with the port.
portsharing={on|off}
The portsharing option is used to make a serial port be shared between
multiple application software. If set to on, a serial port can be accessed by
multiple client programs.(up to 4 clients per port).
Note: Port sharing is not supported for RealPort.