Installation guide

100
set ppp
Purpose Configures Point-to-Point Protocol (PPP) connections, or displays current PPP
settings.
Required permissions Permissions must be set to one of the following:
For a user to display the PPP settings: “set permissions s-ppp=read”
For a user to display and set the PPP settings: “set permissions s-ppp=rw”
Syntax Add a new ppp setting
set ppp add index=1-64
newname=new username
connection_type={incoming|outgoing}
Remove a PPP setting
set ppp remove index=1-64
Configure ppp settings
set ppp [index=1-64]
[connection_type={none|incoming|outgoing}]
[user=username]
[password=password]
[pppauth={none|chap|pap|both}]
[ipaddrmode={ippool|negotiated|static}]
[ipaddr=ip address]
[phonenumber1=phone number]
[phonenumber2=phone number]
[localipaddr_ mode={none|unnumbered|static}]
[localipaddr=ip address]
[idletimeout=0-65535]
[proxy_arp={off|on}]
Display ppp current settings
set ppp