User`s manual

User’s Manual 49

A.1.2 Headers

The Jackrabbit has 0.1" IDC headers at J1 (1 × 3) and J2 (2 × 2) for the power supply and

an external battery connection. There are 2 mm IDC headers at J3 (2 × 5 programming

port) and at J4 and J5 (2 × 20 Rabbit subsystems) for physical connection to other boards

or ribbon cables.

Figure A-3 shows the Jackrabbit footprint for the “motherboard” into which the Jackrabbit

is plugged in. These values are relative to one of the mounting holes.

Figure A-3. User Board Footprint for Jackrabbit

0.084

(2.1)

0.755

(19.2)

0.485

(12.3)

2.284

(58.0)

2.400

(61.0)

0.790

(20.1)

0.900

(22.9)

2.600

(66.0)

0.051

(1.3)

0.500

(12.7)

0.438

(11.1)

1.823

(46.3)

2.100

(53.3)

0.200

(5.1)

3.200

(81.3)

Jackrabbit Footprint