User`s manual

User’s Manual 7
2. HARDWARE SETUP
This chapter describes the Jackrabbit board in more detail, and
explains how to set up and use the accompanying Prototyping
Board.
NOTE: This chapter (and this manual) assume that you have the Jackrabbit Development
Kit. If you purchased a Jackrabbit board by itself, you will have to adapt the informa-
tion in this chapter and elsewhere to your test and development setup.
2.1 Development Kit Contents
The Jackrabbit Development Kit contains the following items:
• BL1810 single-board computer.
• Prototyping Board.
• AC adapter, 12 V DC, 1 A. (Included only with Development Kits sold for the North
American market. A header plug leading to bare leads is provided to allow overseas
users to connect their own power supply with a DC output of 7.5–25 V.)
NOTE: The linear voltage regulator becomes rather hot for voltages above 15 V.
• 10-pin header to DE9 programming cable with integrated level-matching circuitry.
• Dynamic C CD-ROM, with complete product documentation on disk.
• This Getting Started manual.
• A bag of accessory parts for use on the Prototyping Board.
• Screwdriver.
• Rabbit 2000 Processor Easy Reference poster.
• Registration card.