International HygroClip DI digital interface instruction manual

IN-E-HyClip DI-V1_10

Rotronic AG

Bassersdorf, Switzerland

Document code Unit

Instruction Manual

Document Type

HygroClip DI digital interface: instruction

manual

Document title

Page 24 of 24

The following points should also be observed:

• Close the parasitic circuit

• Connect all devices to the potential equalizing cable as often as possible. Electrical

conductors such as machine elements, metal tubes or supporting constructions should

be integrated into the system.

• Protect the potential-equalization cable and connections against corrosion.

• Select the cross-section of the potential equalization cable according to the maximum

equalization current.

If these different measures do not correct the problem, a galvanic separation according to

ISO 9549 may have to be installed. You may also want to consider the use of fiber-optic cables.

15. Document releases

Doc. Release Date Notes

-10 Jan. 16, 2007 Original release

Hardware and firmware:

Firmware Version Date PCB Number

1.0a Apr. 26, 2006 Model DI-3: 66.0860.0015

Model DI-4: 66.0862.0015