Hardware manual

Q : What are the laptop/PC requirements for this modem to function?

A : The USB modem will operate on both a laptop or desktop PC with the

minimum requirements below:

• Laptop/PC hardware must meet or exceed the recommended system

requirements for the installed version of the operating system

• Hard Disk: 50MB free disk space

• Operating System: Windows XP/Windows 2000/Windows Vista/

Mac OS X version 10.4.3

• USB Modem Interface: USB 2.0

• Display Resolution: 800 x 600 pixels or above

(1024 x 768 pixels recommended)

Q : How do I install the modem?

A : Please follow the steps below:

1. Plug-in the modem into the USB slot available on your laptop/PC.

2. Your laptop/PC should detect the modem and install the driver of the

modem automatically.

3. Your laptop/PC will then prompt you to install the DiGi Internet

Connection Manager.

4. Follow the on-screen instructions to complete the installation.

Installation Guide

The procedure for installing the management program depends on the operating

system installed on your PC. The following section takes Windows XP as an

example.

Connecting the E230 with a PC

Note:

Power on your PC before connecting the E230 with the PC. Otherwise, the normal

installation of the E230 may be affected.

The following figure is a sketch of the data cable.

USB connector

Mini-USB connector

1. Connect the Mini-USB connector to the E230

2. Connect the USB connector to the USB interface of the PC