Hardware manual

Requirements for the PC

To use the E230, the PC must meet the following requirements:

• Standard USB interface

• Windows 2000 SP4, Windows XP SP2, Windows Vista, Mac OS

• The hardware of your PC must meet or exceed the recommended system

requirements for the installed version of OS

• Display resolution: 800 × 600 or above

Preparing the E230

Installing the USIM/SIM Card

1. Take out of the USIM/SIM card slot from the E230

2. Insert the USIM/SIM card into the card slot.

Make sure that the USIM/SIM card is properly

inserted

3. Insert the card slot into the E230

1. Launch the DiGi Internet Connection Manager.

2. Go to ‘Tools’ > ‘Options’ > ‘Profile Management’

3. In the ‘Profile Management’ window, perform the setup as below:

• APN: 3gdgnet

• Dial-up Number:

*99#