Hardware manual

WEEE Approval
The wireless device is in compliance with the essential requirements and other
relevant provisions of the Waste Electrical and Electronic Equipment Directive
2002/96/EC (WEEE Directive).
RoHS Approval
The wireless device is in compliance with the restriction of the use of certain
hazardous substances in electrical and electronic equipment Directive 2002/95/EC
(RoHS Directive).
Laws and Regulations Observance
Observe laws and regulations when using your wireless device. Respect the privacy
and legal rights of others.
Care and Maintenance
It is normal that your wireless device gets hot when you use or charge it. Before you
clean or maintain the wireless device, stop all applications and disconnect the
wireless device from your PC.
• Use your wireless device and accessories with care and in a clean environment.
Keep the wireless device from a fire or a lit cigarette.
• Protect your wireless device and accessories from water and vapour and keep
them dry.
• Do not drop, throw or bend your wireless device.
• Clean your wireless device with a piece of damp and soft antistatic cloth.
Do not use any chemical agents (such as alcohol and benzene),
chemical detergent, or powder to clean it.
10
1. Choose Tools > Choose Device
2. Select a device in the device list
3. Click OK to terminate the current terminal and switch to the selected one
Viewing Diagnostics Information
Choose Tools >
Diagnostics
to view the diagnostic information of the terminal
device.
Startup Settings
You can set the Terminal Management to launch automatically along with Windows
and minimise the interface after the startup.
1. Choose
Tools >
Options
2. Click
General
in the navigation tree
3. You can choose the following options:
• Select
Launch on Windows startup: The Terminal Management launches
automatically along with Windows
• Select Minimise window on startup
: The interface of the Terminal Management
is automatically minimised after the Terminal Management is launched
4. Click OK to save the settings
Network Settings
To display the Network interface, do as follows:
1. Choose
Tools
> Options
2. In the navigation tree, click
Network
Selecting a Network Type
You can select different network types to search and access the network.
7