Hardware manual

Area indicated with the "Explosives" sign
Area indicated with the "Power off bi-direction wireless equipment" sign
Area where you are generally required to stop the engine of a vehicle
Traffic Security
Observe local laws and regulations while using the wireless device. To prevent
accidents, do not use your wireless device while driving.
RF signals may affect electronic systems of motor vehicles. For more
information, consult the vehicle manufacturer.
In a motor vehicle, do not place the wireless device over the airbag or in the
airbag deployment area. Otherwise, the wireless device may hurt you owing
to the strong force when the airbag inflates.
Observe the rules and regulations of airline companies. When boarding, switch
off your wireless device. Otherwise, the radio signal of the wireless device
may interfere with the plane control signals.
Safety of Children
Do not allow children to use the wireless device without guidance. Small and sharp
components of the wireless device may cause danger to children or cause
suffocation if child swallows the components.
Environment Protection
Observe the local regulations regarding the disposal of your packaging materials,
used wireless device and accessories, and promote their recycling.
9
1. Click the Network Type tab
2.
In the
Network Type
drop-down combo box, select the corresponding network type
3. In the Band
down-drop list box, select the corresponding frequency band
4. Click Apply
5. Click OK to save and enable the settings
Selecting a Registration Mode
You can set the search and registration mode after selecting the network type.
1. Click the
Registration Mode
tab
2. Select
Auto search and register
or
Manual search and register
Auto Search and Register
When you select Auto search and register, the terminal product can automatically
search and register to a supplied network.
Manual Search and Register
1. Select Manual search and register
2. Click Refresh
3. Select an operator name in the list
4. Click Register
Connection Profile Settings
To display the
Dial-Up
interface, do as follows:
1. Choose Tools > Options
2. In the navigation tree, click Profile Management
3. Click the Dial-Up tab
8