User`s guide

 99
Configuring the Digi Connect Devices
 There are fewer configuration options under “Configuration:” Network, Serial
Ports, GPIO, and Security. Alarm configuration is organized under
“Management,” and there is no System configuration option.
 Some configuration categories have limited choices compared to the default
web interface. areas have limited choices. For example, the port profiles used
for configuring serial ports in the default web interface are not available in the
Java applet.
 The button used to save configuration settings is labeled Save rather than
Apply, and there are additional buttons, Cancel and Apply.
 A status pane logs all activities in your session.
 There is limited online help available for the applet screens. To familiarize
yourself with the configurable fields, you might want to switch to the default
web interface and review the online help for the screens in that interface.
System Requirements for Using the Java Applet Interface
Using the Java applet interface requires that the Sun Java Runtime environment be loaded
on the computer used to configure, monitor, and administer the Digi Connect device.
Accessing the Java Applet Interface
You can temporarily launch the Java Applet interface or use it as the default device
interface. In some cases, a system administrator may have already set the Java applet as
the default device interface. In that case, when you access the device, the Java applet
interface will automatically be displayed. To access the Java Applet Interface:
1 Go to the Home page of the default web interface.
2 Under User Interface, click the Launch button to launch the Java applet.
OR
Click the Set as Default button to use the Java applet as the default device
interface.