User`s guide

Configuration through the Default Web Interface
78  Digi Connect Family User’s Guide
Open the Web Interface
To open the default web interface, you can either:
 Enter the Digi Connect device’s URL in a Web browser and log on to the
device, if required.
 Use the Digi Device Discovery utility to locate the device and open the Web
interface.
By Entering the Device’s URL in a Web Browser
1 In the URL address bar of a Web browser, enter the IP address of the device.
2 If security has been enabled for the device, a login dialog will be displayed. Enter
the user name and password for the device. If you do not know the user name and
password for the device, contact the system administrator who initially set up the
device.
.
3 After you log on, the Home page of the default web interface is displayed. See
"Organization of the Web Interface" on page 80 for an overview of using the Home
page and other linked pages.
Note The idle timeout will automatically log the user out of the device after 5
minutes.
By Using the Digi Device Discovery Utility
Alternatively, you can use the Digi Device Discovery Utility to locate your Digi Connect
device and open the default web interface.
1 From the start menu, select Start > Programs > Digi Connect > Digi Device
Discovery. The Digi Device Discovery utility is displayed.
2 Locate the device in the list of devices, and double-click it, or select the device
from the list and select Open web interface in the Device Tasks list.
3 Depending on whether a system administrator has configured password
authentication for the device, you may need to log on to the device. If a login dialog
is displayed, enter the user name and password for the device. If you do not know
the user name and password for the device, contact the system administrator who
initially set up the device.