User`s guide

Configuration through the Digi Device Setup Wizard
72  Digi Connect Family User’s Guide
ping ip-address
where ip-address is the address you assigned to the device server.
Example
ping 192.168.2.2
A reply should be returned.
Configuration through the Digi Device Setup Wizard
The Digi Device Setup Wizard helps you configure the device according to one of several
port profiles, or configuration scenarios that characterize the manner in which the device
will be used.
Using Port Profiles to Configure Devices
The Digi Device Setup Wizard allows you to configure a serial port based on the way the
port will be used. Each port profile displays the relevant settings for the configuration.
There are several port profile choices for the Connect Family but if you see a profile listed
that is not available in your brower, it means your device does not support the feature. The
profiles are described in more detail on the following pages:
 RealPort: Allows you to map a COM or TTY port to the serial port. (Not
supported in Digi Connect WAN)
 Console Management: Allows you to access a device’s console port over a
network connection.
 TCP Sockets: Allows a serial device to communicate over a TCP network.
 UDP Sockets: Allows a serial device to communicate using UDP.(Not
supported in Digi Connect WAN)
 Serial Bridge: Configures one side of a serial bridge. A bridge connects two
serial devices over the network, as if they were connected with a serial cable.
 Modem Emulation: Allows you to configure the serial port to act as a modem.
(Not supported in Digi Connect WAN.)