User`s guide

 69
Configuring the Digi Connect Devices
Assign an IP Address to the Device
There are several ways to assign an IP address to a device:
 Using the Digi Device Setup Wizard.
 Using Dynamic Host Configuration Protocol (DHCP) from the default web
interface (only for changing the IP address once it has been assigned).
 Using the Command-Line Interface.
 Using Automatic Private IP Addressing (APIPA), also known as Auto-IP.
Configuring the IP Address Using the Digi Device Setup Wizard
Using the Digi Device Setup Wizard is the preferred method of assigning an IP address
and initially configuring your Digi Connect device. The Digi Device Setup Wizard is
supplied on the CD that accompanies your Digi Connect device.
The Digi Device Setup Wizard “discovers” the device, and then provides a method for
assigning an IP address as well as configuring your device for your needs. It can be used
in conjunction with the web interface to ‘tweak’ the specific environment. Setup is
specially designed for the Windows environments, and is quick, automated, and complete.
Prerequisites
This procedure assumes the following:
 The device server is connected to the network and powered up.
 The CD will be used on a system running Microsoft Windows operating system
or a Unix operating system.
 That you have located the device server’s MAC address, located on the label on
the bottom of the product, and recorded it for later use in assigning an IP
address.
Procedure
1 Insert the Digi CD in the CD drive.
2 If the CD does not start automatically, double-click My Computer > CD ROM
Drive > setup.exe