User`s guide

66 

Digi Connect Family User’s Guide

Configure with an Access Point - Infrastructure Mode

Configure your network using an access point with the SSID - Connect and all

encryption disabled (such as WEP & WPA).

2 Power up the device.

3 Launch the Discovery program and proceed with the configuration.

Configure without an Access Point - Laptop with a Wireless Card Ad-Hoc Mode

Configure the wireless card to operate in Ad-Hoc mode with the SSID - Connect.

2 Power up the device.

3 Launch the Discovery application on the laptop and proceed with the configuration.

Command Line Access

Connect the Digi Connect Wi-SP to a PC with a serial cable.

2 Set the Digi Connect Wi-SP DIP switches in the On or up position.

DIP Switch settings for Command Line access

for both the Digi Connect Wi-SP and the Digi Connect SP.

3 Access a terminal emulation program such as HyperTerm

Start > Accessories > Communication > Hyperterm and enter a name for

the connection.

4 Select COM1 and click OK

5 Set the port settings to 9600, 8, None, 1, None (default settings) click Apply then

OK.

6 Enter the login username - root

and the default password -dbps

7 Go to the Digi Connect Family Command Reference on the enclosed CD for the

command descriptions. See the set wlan command for all parameters.

1234