User`s guide

Important Safety Information
62  Digi Connect Family User’s Guide
Important Safety Information
To avoid contact with electrical current:
 Never install electrical wiring during an electrical storm.
 Never install an Ethernet connection in wet locations unless that connector is
specifically designed for wet locations.
 Use caution when installing or modifying Ethernet lines.
 Use a screwdriver and other tools with insulated handles.
 You and those around you should wear safety glasses or goggles.
 Do not place Ethernet wiring or connections in any conduit, outlet or junction
box containing electrical wiring.
 Installation of inside wire may bring you close to electrical wire, conduit,
terminals and other electrical facilities. Extreme caution must be used to avoid
electrical shock from such facilities. You must avoid contact with all such
facilities.
 Ethernet wiring must be at least 6 feet from bare power wiring or lightning rods
and associated wires, and at least 6 inches from other wire (antenna wires,
doorbell wires, wires from transformers to neon signs), steam or hot water
pipes, and heating ducts.
Safety Standards
Digi Connect RG Digi Connect ES
UL 60950 UL 60950-1
CSA 22.2 No. 60950 CSA 22.2 No. 60950
EN60950
EN60950
IEC/EN 60601-1
UL/CUL 60601-1