User`s guide

 31
Introduction
User Interfaces
Digi Connect devices support a variety of user interfaces for configuring and monitoring
tasks, including:
 The Digi Device Setup Wizard
 A default web-based interface
 An optional Java-applet interface
 Telnet Command-Line Interface
 Configuration via Remote Command Interface (RCI) over the serial port
 Simple Network Management Protocol (SNMP)
 Connectware Manager Console
Network Key A shared key (ASCII or Hexadecimal) to be used for WEP or WPA-PSK.
Username A username to be specified when 802.1x -based authentication (WPA) is used.
Password A password to be specified when 802.1x based authentication (WPA) is used.
Wireless Networking
Status Features:
You can display the following status information for Wireless Digi Connect
devices. For more detailed descriptions, see "Wireless Statistics" on page 113.
Connection Status The status of the wireless network connection.
Network Mode
The network mode currently in use:
-- Infrastructure Mode
--Ad-Hoc Mode
Data Transfer Rate The data transfer rate of the current connection.
Channel The wireless network channel currently in use.
SSID The selected SSID of the wireless network.
WEP / WPA security
and encryption
The status of the WEP/WPA/WPA2 security features, including:
-- The Authentication Method currently in use
-- Whether authentication is enabled or disabled
Signal Strength
A statistic that indicates the strength of the radio signal between 0 and 100
percent.
Feature Description